Showing all 18 results
White
Anthracite Grey
Black
Recess
Exact
Choose this option if your blinds will be fitted within the window recess. To get the perfect fit, measure both the width and drop in three different spots, then give us the smallest measurement from each. We’ll take 10mm off the width to ensure your blind operates smoothly once mounted inside the brackets.
Select this option when your blinds will sit outside the window recess. You can decide how far you’d like them to extend past the window frame. Measure the full width and drop in three places and send us the smallest of each. For the best coverage and minimal light seepage, we suggest adding around 7.5cm to each side, as well as the top and bottom.
Left Bunch
Right Bunch
These options let you decide how you would like your blinds to bunch when they are not drawn, “Centre Split” is not an option on Allusion Blinds
Ice White Headrail
Anthracite Grey Headrail
Black Headrail
Top Fix Bracket – Used for fixing the blind into the top of the recess/ceiling.
Face Fix Bracket – Used for fixing the blind into the window frame/wall.
Choose this option if your blinds will be fitted within the window recess. To get the perfect fit, measure both the width and drop in three different spots, then give us the smallest measurement from each. We’ll take 10mm off the width to ensure your blind operates smoothly once mounted inside the brackets.
Select this option when your blinds will sit outside the window recess. You can decide how far you’d like them to extend past the window frame. Measure the full width and drop in three places and send us the smallest of each. For the best coverage and minimal light seepage, we suggest adding around 7.5cm to each side, as well as the top and bottom.
Perfect Fit Shutters are not suitable for square-edged window or door frames. They can only be installed on uPVC windows and doors with internal rubber beading.
To check suitability, measure the bead depth—this is the distance from the glass to the outer edge of the window frame. This measurement must fall between 18mm and 30mm.
Bracket sizes are available in even numbers only: 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, and 30mm.
If your measurement falls between sizes, always round down.
(e.g. 21mm = 20mm bracket, 23mm = 22mm bracket.)
Bead depth is critical.
Ordering the wrong bracket size may cause the shutter to appear too large or too small — when in fact, the issue is with the bracket, not the shutter itself.
For example, if you need a 20mm bracket but choose 22mm instead, there will be an extra 4mm gap between the top and bottom brackets, making the shutter look undersized.
If your bead depth is less than 18mm or more than 30mm, this product is not suitable for your windows or doors.
For guidance, please refer to our measuring guide or videos before placing your order.
1 Panel
2 Panels
3 Panels
Left Tilt
Right Tilt
How to Measure for Handle Position (Made Easy)
Measuring for your handle position is simple — just follow these quick steps:
Open the handle fully so it’s at a 90° angle. This is important, as we’re measuring to where the handle actually sits when it’s open — not the base plate.
If your handle is at the bottom of the window:
Measure from the left edge of the visible glass to the center of the handle itself (while it’s fully open).
If your handle is on the left or right side of the window:
Measure from the bottom edge of the visible glass to the center of the open handle.
Tip: Don’t measure to the base plate. The goal is to position the rebate cut-out correctly so the open handle can rotate freely — that’s why we measure to the center of the handle when it’s open.
Bottom Handle
Left Handle
Right Handle
How to Measure Your Glass (Quick & Easy)
Use a metal tape measure – it’s more accurate.
Measure just the visible glass, not the rubber seal or beading around it.
Take 3 measurements for both the width and the drop (top, middle, bottom for width — left, middle, right for drop).
Write down the smallest measurement for each — that’s the one to use.
Example:
If your width measurements are 840mm, 838mm, and 839mm → use 838mm.
Left Bunch
Split Bunch (Only Available on Cord Option)
Right Bunch
These options let you decide how you would like your blinds to bunch when they are not drawn, “Center Split” allows the blinds to evenly distribute to both sides.
Control Side – Left
Control Side – Right
Ice White Headrail
Anthracite Grey Headrail
Black Headrail
Top Fix Bracket – Used for fixing the blind into the top of the recess/ceiling.
Face Fix Bracket – Used for fixing the blind into the window frame/wall.
Choose this option if your blinds will be fitted within the window recess. To get the perfect fit, measure both the width and drop in three different spots, then give us the smallest measurement from each. We’ll take 10mm off the width to ensure your blind operates smoothly once mounted inside the brackets.
Select this option when your blinds will sit outside the window recess. You can decide how far you’d like them to extend past the window frame. Measure the full width and drop in three places and send us the smallest of each. For the best coverage and minimal light seepage, we suggest adding around 7.5cm to each side, as well as the top and bottom.
